News and Information for the vehicle recycling industry

Hensel
Share on facebook
Share on twitter
Share on linkedin
    • News from previous months

    • Archives

  • EVENTS
  • VIEWPOINTS
  • CONTACT
  • ABOUT
  • NEWSLETTER
  • MEDIA
UCC

EUROBAT Position Paper on labelling of Automotive SLI Batteries

EUROBAT, the Association of European Automotive and Industrial Battery Manufacturers recently released their position paper on labelling of automotive SLI batteries.

 

EUROBAT Position Paper labelling of Automotive SLI Batteries p

Specific features of automotive SLI (starting-lighting-ignition) lead batteries are the capacity, which represents the maximum amount of energy that can be extracted from the battery under specific conditions (in Ah) and the cold cranking current (CCA), which is the ability to start the internal combustion engine at cold temperatures. In view of the European Commission’s first proposal to review the Battery Regulation EC 1103/2010, EUROBAT proposes the following recommendations on the labelling of the capacity and the cold cranking current on such batteries:

The current Regulation mentions +/-10% accuracy on the labelled Cold Cranking Current (CCA) and the Capacity (Ah). This is far too large for this application as, with this accuracy range, cars could wrongly be equipped with batteries that are too weak at replacement, which affects the reliability and lifetime of the batteries. For this reason, we strongly recommend that the new proposal should increase the accuracy of the Cold Cranking Current (CCA) and the Capacity (Ah) as follow:

  • EUROBAT requests that the new Regulation would refer to the European standard EN 50342-1 (latest version published in 2018). The Commission supported our position in 2014 and updated the current Regulation-FAQ-document [1].

The current Regulation does not cover motorcycle batteries, as confirmed by the European Commission. The European Industry (Cenelec TC21X) developed a standard on motorcycle batteries, which is now published under the EN 50342-7.

  • EUROBAT requests that the new Regulation include motorcycle batteries in its scope by referring to the new standard. This standard also includes a chapter on the specific accuracy of CCA and Ah for motorcycle batteries.

The current Regulation refers to both the European and the international standard families, EN 50342 and IEC 60095 respectively. Although there is a lot of alignment between both families, there are also some important differences. Due to this, it is possible to have similar labels on batteries that actually are designed very differently, which is potentially misleading for consumers.

  • EUROBAT requests that the new Regulation would refer to one single standard family, preferably the Cenelec EN 50342, and delete the reference to IEC 60095 in order to have unambiguous labelling. The European standards have specific features that better serve the European markets and European OEMs are using this standard.

Last, but not least, EUROBAT requests that all legislation on mandatory labelling requirements for batteries (such as chemicals colour codes standard, the mandatory safety and environmental pictograms etc…) would be included in one single Regulation.

  • EUROBAT requests that the new Regulation would include all mandatory labelling requirements for batt 

[1] Frequently Asked Questions on Directive 2006/66/EU on Batteries and Accumulators and Waste Batteries and Accumulators can be found at www.ec.europa.eu/environment on page 16. 

Source: www.eurobat.org

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn